II Premium Wood Glue

Titebond® II Premium Wood Glue is the first one-part glue to pass the test for the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Titebond II cleans up with water – use a damp cloth while glue is wet. Scrape off and sand dried excess.

• First one-part wood glue to pass the ANSI Type II Water Resistance testing
• Designed for exterior use
• Easy to apply with bottle (for fine application), roller spreader or brush
• Excellent sandability
• Unaffected by finishes
• FDA approved for indirect food contact
• Easy cleanup with water

• Application Temperature: Above 55°F
• Open Assembly Time: 3-5 minutes (70°F/50% RH)
• Total Assembly Time: 10-15 minutes (70°F/50% RH)
• Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 PSI for softwoods, 125-175 PSI for medium woods and 175-250 PSI for hardwoods)

What’s Included:

• (1) Titebond® II Premium Wood Glue – 16 oz

• Not for continuous submersion or for use below the waterline.
• Not for structural or load bearing applications.
• Due to low pH, product may cause corrosion on metal surfaces; test product before using where rusting/corrosion may be a concern.
• Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken – agitation should restore product to original form.
• Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, contact the Woodcraft Technical Support Team at 1-800-347-4583.

Read Material Safety Data Sheet (MSDS) before use. Keep from Freezing. KEEP OUT OF THE REACH OF CHILDREN.